Jared's Pitts S1-SS Build

Jared's Pitts S1-SS Build

(1116 Total Hrs)

Fitted and drilled bottom stringers. Mounted side stringers

14 Nov 2022

4.5 hours

#jared-November-2022

Fabricated fixture for laminating bottom stringers. Laminated bottom stringers. Fabricated seat back

11 Nov 2022

6.5 hours

#jared-November-2022

Used West Systems to laminate stringers.

Varnished turtle deck skin. Drilled then varnished side formers. Fabricated bottom bulkheads for formers

10 Nov 2022

6 hours

#jared-November-2022

Varnish turtle deck interior

9 Nov 2022

2.5 hours

#jared-November-2022

Put two coats of Polyfibers EV-400 Epoxy varnish

Fabricated side stringers

8 Nov 2022

3 hours

#jared-November-2022

Glued skin to turtle deck. Fabricated and bonded stiffeners to turtle deck skin. CAD modeled lower stringers. Milled stringer material

7 Nov 2022

7 hours

#jared-November-2022

Trimmed turtle deck skin to snap. Wet skin and clamped to set bend

6 Nov 2022

2 hours

#jared-November-2022

Completed baggage door. Started on turtle deck skin

4 Nov 2022

6.5 hours

#jared-November-2022

Completed assembling the baggage door, including the latch, stiffeners and hinge. Started work on the turtle deck skin. Todd Gould came out today and gave me a hand

Continued work on turtle deck

2 Nov 2022

4.5 hours

#jared-November-2022

Fabricated and glued forward turtle deck bulkhead. Profiled turtle deck side stringers

1 Nov 2022

4.5 hours

#jared-November-2022

� 2022

Design pdevty